Reset Brother HL 2140 Toner 100%

Reset Brother HL 2140 Toner 100%

1.       To do that, turn off your printer and open the front access panel.

2.       Press and hold the white button, while turning on the printer. The toner, drum and error lights should remain lit.

3.       Release the white button and press it again twice.

4.       Release, pause and press again five times.

5.       If done correctly, when you plug your printer to your computer it should try to reinstall the drivers under Brother Maintenance Mode. Your computer will fail and will not find the appropriate drivers.

6.       Unplug your printer, turn it off, turn on and connect to the computer.

7.       Your computer should now recognize your Brother printer        just like in the past.

8.       See if the toner light disappears, if it does, print a test               page and you’re done.

9.       If you are still having the same issues, try using tape to  cover the sensor window instead of a black marker and  repeat steps 1 – 8 of this page. If the toner light disappears then success, if you print and it’s blank, then you are outof toner. 

Thanks For Visiting My Page.