Fix Epson Expression Premium XP-510, XP-610, XP-615, XP-710, XP-810, XP-950 error Waste Ink Pad Counter is Full
Fix Epson Expression Premium XP-510, XP-610, XP-615, XP-710, XP-810, XP-950 error Waste Ink Pad Counter is Full
Download Epson Expression Premium XP-510, XP-610, XP-615, XP-710, XP-810, XP-950 Adjustment Program/ resetter for free and reset waste ink pad counters of Epson printer alternate red light blinking error, Fix Epson printer LCD error “A Printer’s Ink Pads at the end of its service life. Please contact Epson Support.”
When Epson printer waste ink pad counter is overflow, it will stopped working and the red light will alternate blinking, on the LCD screen and also computer show windows error: "A Printer’s Ink Pads at the end of its service life. Please contact Epson Support." You only need spend a little time to reset your Epson printer, now your printer will prints again!
----Follow below steps to Reset the Waste Ink Pad Counter----
↪Turn on the printer and connect the USB cable
↪ Download Adjustment Program Epson Expression XP-510, XP-610, XP-615, XP-710, XP-810, XP-950
↪ Extract file.
↪ If Adjprog can’t be open, right-click Adjprog, go to Properties, then go to Compatibility – checkbox: Run this program in compatibility mode: select Windows XP SP2/SP3 – OK
(1) Open AdjProg - Accept. Look at the Sequential adjustment mode button in the off state.
(2) Run Activator.exe
(3) Press and hold the Drag me! button
(4) Drag to the Sequential adjustment mode button
(5) Click the Sequential adjustment mode
(6) Click Enable!
(7) Look at the Sequential adjustment mode button is now active
(8) Open the Sequential adjustment mode
(9) Open Model Name then selects one: XP-510, XP-610, XP-615, XP-710, XP-810, XP-950
(10) Open Destination then selects one.
(11) Open Port. Select USB port printer (don't use Auto selection)
(12) OK
(13) Open the Waste Ink Pad Tray - select Replacement
(14) Click OK to continue
(15) Check the box Main pad counter and Platen pad counter
(16) Click Check - OK
(17) Click Initialization - OK
(18) Click Next to continue
(19) Final check pattern print. Load the paper first (Letter or A4) then select Print. Wait for the printing process to complete.
(20) Click Next to continue
(21) Shipping setting. Write the value of the shipping settings, click Write. Wait for the process to complete.
(22) Click Finish to end the process.
↪ If Adjprog can’t be open, right-click Adjprog, go to Properties, then go to Compatibility – checkbox: Run this program in compatibility mode: select Windows XP SP2/SP3 – OK
(1) Open AdjProg - Accept. Look at the Sequential adjustment mode button in the off state.
(2) Run Activator.exe
(3) Press and hold the Drag me! button
(4) Drag to the Sequential adjustment mode button
(5) Click the Sequential adjustment mode
(6) Click Enable!
(7) Look at the Sequential adjustment mode button is now active
(8) Open the Sequential adjustment mode
(9) Open Model Name then selects one: XP-510, XP-610, XP-615, XP-710, XP-810, XP-950
(10) Open Destination then selects one.
(11) Open Port. Select USB port printer (don't use Auto selection)
(12) OK
(13) Open the Waste Ink Pad Tray - select Replacement
(14) Click OK to continue
(15) Check the box Main pad counter and Platen pad counter
(16) Click Check - OK
(17) Click Initialization - OK
(18) Click Next to continue
(19) Final check pattern print. Load the paper first (Letter or A4) then select Print. Wait for the printing process to complete.
(20) Click Next to continue
(21) Shipping setting. Write the value of the shipping settings, click Write. Wait for the process to complete.
(22) Click Finish to end the process.
See in Video
Congratulation!
Now your printer is completely reset.
ABOUT THE AUTHOR
Hello We are OddThemes, Our name came from the fact that we are UNIQUE. We specialize in designing premium looking fully customizable highly responsive blogger templates. We at OddThemes do carry a philosophy that: Nothing Is Impossible
0 Comments:
Post a Comment